---

ESP32-CAM-MB WiFi Bluetooth Development Board OV2640 2MP Camera Module ESP32-CAM WIFI Module with IPX interface for Arduino

[ESP32-CAM]   Description:   Modle: ESP32-CAM Operating Voltage: 5V SPI Flash: 32 Mbit RAM: Inter 520KB+, External 4M PSRAM Bluetooth: BLuetooth 4.2 BR/EDR & BLE standard WIFI: 802.11/b/g/n/e/i Port: UART, SPI, I2C, PWM IO Port: 9 Serial port rate: 115200 bps Picture form: JPEG (only OV2640 support), BMP, GRAYSCALE Spectrum range: 2412 -2484MHz Antanna: Onboard PCB Antanna 2dBi Security: WPA/WPA2/WPA2-Enterprise/WPS Operating Temperature: -20 -85 Degrees Celsius Storage Tepmerature: -40 -90 Degrees Celsius, <90%RH   Transmit power:   802.11b: 17+/-2 dBm (@11Mbps) 802.11g: 14+/-2 dBm (@54Mbps) 802.11n: 13+/-2 dBm (@MSC7)   Receive Sensitivity:   CCK, 1 Mbps: -90dBm CCK, 11 Mbps: -85dBm 6 Mbps(1/2 BPSK): -88dBm 54 Mbps (3/4 64-QAM): -70dBm MCS7 (65 Mbps, 72.2 Mbps): -67dBm   [ESP32-S]   The main chip uses a low-power dual-core 32-bit CPU with a frequency of up to 240MHz and a computing power of up to 600DMIPS. Default 32Mbit SPI Flash, 520KB SRAM Support SoftAP and Station mode Ultra-small 802.11b/g/n Wi-Fi + BT/BLE SoC module Support UART/SPI/I2C/I2S/PWM/ADC/DAC, etc. Support for firmware upgrade (FOTA) Antenna supports on-board antenna or IPEX block output   [OV2640 Camera Module]   Feature:   The OV2640 image sensor features 2 megapixels (1632x1232 pixels) Small size, low operating voltage, and provides all the features of a single chip UXGA camera and image processor. Through the SCCB control, you can output the entire frame, sub-sampling, take the window, and a variety of resolution 10-bit sampling data. The product UXGA images up to 15 frames per second. The user can fully control the image quality, data format and transmission mode.   Specification:   High sensitivity for low-light applications Low voltage for embedded applications Standard SCCB interface, compatible with I2C interface RawRGB, RGB (GRB4: 2: 2, RGB565 / 555/444), YUV (4: 2: 2) and YCbCr (4: 2: 2) output format Supports UXGA, SXGA, VGA, QVGA, QQVGA, CIF, QCIF and up to 40x30 size Supports VarioPixel sub sampling mode Automatic impact control functions include: automatic exposure control, Automatic gain control, automatic white balance, automatic elimination of light stripes, automatic black level calibration. Image quality control including color saturation, hue, gamma, sharpness ANTI_BLOOM ISP with noise cancellation and dead pixel compensation Support image scaling Lens loss compensation Saturation automatic adjustment Edge enhancement automatic adjustment Noise reduction automatic adjustment Sensing array 1632x1232 Maximum format UXGA IO Voltage 1.7V -3.3V Analog voltage 2.5 -3.0V (internal LDO to power supply 1.2V) Power consumption TBD sleep<20μA Temperature operation -30 ℃ to 70 ℃ Stable working 0 ℃ to 50 ℃ Output format (8-bit) YUV / YCbCr4: 2: 2 RGB565 / 555/444 GRB4: 2: 2 Raw RGB Data Optical size 1/4" Viewing angle 25 Degree Maximum rate 15fps SXGA sensitivity 1.3V / (Lux-sec ) Signal to noise ratio 40dB Dynamic range 50 dB View mode Progressive electron exposure 1 line to 1247 lines Pixel area 2.2 μm x 2.2 μm Dark current 15 mV / s at 60 C   ESP32-CAM（Camera Module+Antenna+IPEX Cable）   Features:   Low-power dual-core 32-bit CPU for application processors Main frequency up to 240MHz, computing power up to 600 DMIPS Built-in 520 KB SRAM, external 4M PSRAM Supports interfaces such as UART/SPI/I2C/PWM/ADC/DAC Support OV2640 and OV7670 cameras, built-in flash Support image WiFi upload Support TF card Support multiple sleep modes Embedded Lwip and FreeRTOS Support STA/AP/STA+AP working mode Support Smart Config/AirKiss one-click distribution network Support secondary development   Description:   The ESP32-CAM has a very competitive small form factor camera module that can operate independently as a minimum system with a footprint of only 27*40.5*4.5mm and a deep sleep current of up to 6mA. ESP-32CAM can be widely used in various IoT applications. It is suitable for home smart devices, industrial wireless control, wireless monitoring, QR wireless identification, wireless positioning system signals and other IoT applications. It is an ideal solution for IoT applications. ESP-32CAM is packaged in DIP and can be directly plugged into the backplane for quick production. It provides customers with a highly reliable connection method and is convenient for use in various IoT hardware terminals.   ESP32-CAM-MB（Camera Module+USB to Serial Port CH340G）   Introduction:   The HK-ESP32-CAM-MB module is a small camera module with a size of 39.8*27*. This module can work independently as the smallest system. A new WiFi+Bluetooth dual-mode development board based on ESP32 design, using PCB on-board antenna, with 2 high-performance 32-bit LX6CPU, using 7-level pipeline architecture, main frequency adjustment range 80MHz to 240Mhz. Ultra-low power consumption, deep sleep current is as low as 6mA. It is an ultra-small 802.11b/g/n Wi-Fi + BT/BLE SoC module HK-ESP32-CAM-MB adopts Micro USB interface, convenient and reliable connection method, convenient to apply to various IoT hardware terminal occasions.   Basic performance parameters:   Using low-power dual-core 32-bit CPU, which can be used as an application processor. The main frequency is up to 240MHz, and the computing power is up to 600 DMIPS Built-in 520 KB SRAM, external 8MB PSRAM Support UART/SPI/I2C/PWM/ADC/DAC and other interfaces Support OV2640 and OV7670 cameras, built-in flash Support picture WiFI upload Support TF card Support multiple sleep modes. Lwip and FreeRTOS embedded Support STA/AP/STA+AP working mode Support Smart Config/AirKiss one-click network configuration Support secondary development   Parameter:   Working voltage: 4.75-5.25V SPIFlash: Default 32Mbit RAM: Internal 520KB + external 8MB PSRAM Wi-Fi: 802.11b/g/n/e/i Bluetooth: Bluetooth 4.2BR/EDR and BLE standard Support interface (2Mbps): UART, SPI, I2C, PWM Support TF card: maximum support 4G IO port: 9 Serial port rate: default 115200bps Spectrum range: 2400 ~2483.5MHz Antenna form: onboard PCB antenna, gain 2dBi Image output format: JPEG (only OV2640 support), BMP, GRAYSCALE Package method: DIP-16 Transmit power: 802.11b: 17±2dBm (@11Mbps) 802.11g: 14±2dBm (@54Mbps) 802.11n: 13±2dBm (@MCS7) Receiving sensitivity: CCK, 1Mbps: -90dBm CCK, 11Mbps: -85dBm 6Mbps(1/2BPSK): -88dBm 54Mbps(3/464-QAM): -70dBm MCS7 (65Mbps, 72.2Mbps): -67dBm Power consumption: Turn off the flash: 180mA@5V Turn on the flash and adjust the brightness to maximum: 310mA@5V Deep-sleep: The lowest power consumption can reach 6mA@5V Moderm-sleep: the lowest can reach 20mA@5V Light-sleep: the lowest can reach 6.7mA@5V Security WPA/WPA2/WPA2-Enterprise/WPS Working temperature: -20 ℃~ 70 ℃ Storage environment: -40 ℃~ 125 ℃, <90%RH Weight: 10g   Application scenarios:   Image transmission of home smart devices Wireless monitoring Smart agriculture QR wireless recognition Wireless positioning system signal and other IoT applications   Package include:   1 x ESP32-CAM 1 x ESP32-S 1 x OV2640 Camera Module 1 x ESP32-CAM-MB

ESP32-CAM-CH340 camera module

This module Integrated ESP32-CAM + CH340 Module