ET X 08 2000 точек/дюйм Регулируемая 2 4G Беспроводная игровая мышь LED с подсветкой usb

ET X 08 2000 точек/дюйм Регулируемая 2 4G Беспроводная игровая мышь LED с подсветкой usb

Descriptions:
1. DPI adjustable
5 DPI levels: 800 / 1200 / 1600 / 2000 / 2400, the factory setting is 1200 dpi, press the mouse button button to easily adjust the dpi. The LED indicator flashes once, and it converts to 800 CPI, twice to 1200 CPI, three times to 1600 dpi,  four times to 2000 dpi, and five times to 2400 dpi.
2. Customized features for the fourth and fifth buttons
The two side button mouse are the default backwards and forwards buttons. They can be set to different functions. For installation of the software, please download the software through our website eptc.cn.
3. LED backlight
There are three parts of the LED backlight on the mouse, which is located at the bottom of the wheel, logo and decorative led switch button. There are three options, off / light, put it to light, the LED will illuminate.
4. Lower power alarm for replacement of new batteries
When the mouse is working for a certain period of time, the battery will be powered off, and the low-power indicator will flash in red to remind you to replace the battery.
5. Power saving mode and power off
If the mouse does not work for 8 minutes, it will go to power save mode and press any button to restart it.
If you turn off the PC or remove the Nano receiver from the USB port, press any button or move the mouse to enter power save mode.
6. Nano receiver
A very small size design for the nano receiver, which plugs in and stays on the USB port of the PC/notebook without interference.
For portable travel design, the nano receiver can be inserted into the slot on the bottom of the mouse.
7. Polling rate adjustable function
2 Adjustable polling rate: 125 Hz/250 Hz. The default is 250 Hz. Press and hold the right button and the wheel button to switch. The LED flash is switched 5 times at low speed, and the LED flash is quickly converted to 250 Hz 5 times.
8. Reconnecting the mouse and the nanoreceiver has a built-in code that can set a mouse to a receiver or set several of the mouse to a receiver. The mouse and receiver need to be reconnected under high temperature, high magnetic, and strong vibration conditions.
a. Unplug the nano receiver from the USB port and plug it in.
b. Hold the mouse at 50cm with the receiver and re-storage the battery.
c. You can use it by reconnecting.

Features:
- Top wireless gaming mouse solution.
- 2.4GHz two-way transmission, up to 10 meters.
- Low power alarm indicator.
- 5 adjustable DPI levels: 800/1200 / 1600/2000 / 2400, default is 1200DPI
- Multi-level power saving mode design.

Specifications:
Product size: 123.5mm*71mm*39 mm/4.86*2.80*1.54" (L*W*H)
Вес: около 80 граммов (без аккумулятора)
Кнопка: 7 кнопок, включая колесо прокрутки
Рабочее напряжение: 1,5 V
Рабочий ток: 6,5ма/9ма (со светодиодом)
Питание: 1 х АА батарея (не наклоняется)
Ключ стрейч: 70±10g
ИПЦ: 800/1200/1600/2000/2400
Скорость сканирования: 30 IPS
Расстояние передачи: 10 м
Срок службы переключателя: 5 миллионов циклов
Беспроводная несущая частота: 2402 МГц-2480 МГц
Интерфейс USB: USB2.0, также совместим с USB1.1
Требования к ОС: для Windows XP/Vista/Win 7/Win 8

Установка:
1. Найдите беспроводную мышь и нано-приемник в упаковке
2. Вставьте нано-приемник в usb-порт на ПК
3. Для корпуса мыши требуется одна батарея AA (батарея в комплект не входит)
4. Светодиодный индикатор продолжает мигать в течение нескольких секунд, и мышь будет работать.

Примечания:
1. Возможны незначительные отклонения в размере из-за ручного измерения, различных методов измерения и инструментов.
2. Изображение может не отображать фактический цвет товара из-за различных фотографий света, угла и монитора.

1 X Mouse
1 X USB Receiver