5pcs/lot PWM to Voltage 0-5V 0-10V Low Frequency 5~500Hz Linear Conversion Transmitter Module | Электронные компоненты и

---

PWM to Voltage PWM to 0-5V 0-10V Low Frequency 5~500Hz Linear Conversion Transmitter Module

 

PWM to voltage module: This is a linear conversion module that is processed by the internal chip to process the output PWM data with a voltage signal.   Module parameters:   1, the supply voltage: 9V ~ 24V   2. Signal input voltage range: 4~24V   3, signal input frequency range: 5Hz ~ 500Hz   4, signal input duty cycle range: 0 ~ 100%   5, the output voltage: 0.00V ~ 5.00V / 0.00V ~ 10.00V   6. Input mode: J1 pad on the circuit board: The default is open circuit, it has not been used yet.   7. Output mode: J2 pad on the circuit board: open circuit (output 0.00V ~ 5.00V); short circuit (output 0.00V ~ 10.00V), the default is open circuit.   8, the scope of application: remote data acquisition and control equipment;   9, size: (length) 26mm * (width) 23mm * (height) 10mm   10, module interface:   24V: Positive power supply interface (9V ~ 24V). G: Power ground interface. IN: Signal input positive interface. G: Signal input negative interface. OUT: Output interface of the signal (0.00V ~ 5.00V / 0.00V ~ 10.00V). G: Power ground interface.   Note: When outputting 0.00V to 10.00V, the power supply voltage should be 15 volts.   Output (0.00V ~ 5.00V) Resolution: 0.050V / D (volt / per duty cycle) Output (0.00V to 10.00V) resolution: 0.100V/D (volts per duty cycle)   Calculate the measured duty cycle formula: (output voltage (V) / resolution) = duty cycle (%).   For example: Output (0.00V ~ 5.00V) Output is 2.5V          (2.5 (V) / 0.05) = 50 (%).   5  *  PWM to Voltage Module